Glass Reactor Parts and Accessories is made for use with glass filter reactors. The service kit is intended to replace the primary bearings and seals that may fail over time, as well as basic components that can be easily lost or broken. Items include PTE stir shaft bearing, GL 18 connectors, O-rings, centering rings, new PTFE open close valve, new hose bumpers, and new base plate filter seals and adapters.Glass cover specially made
PTFE drain port, Condenser set with 20L receiving flask for 10L, 20L, 50L and 100L glass reactors
This jacket will greatly increase the efficiency of your recirculating chiller, it will extend the life of the chiller compressor, allow your coolant temperature to go further down, and cut your utility bill dramatically.
Glass drain Port with PTFE on/off valve, specially made for glass reactors

Showing 1–18 of 70 results

1000ML 24/40Glass Pressure Equalizing Additonal Funnel with Glass Stopcock

$ 59.00
1000ML,24/40,Glass Pressure Equalizing Additonal Funnel with Glass Stopcock Be made of G3.3 borosilicate glass. This borosilicate glass with low linear

1000ml/2000ml/3000ml Round Bottom Medical grade Boro. glass 3-neck glass flask reactor, Flask reactor

$ 54.56$ 83.85
1000ml/2000ml/3000ml Round Bottom Medical grade Boro. glass flask reactor bottle, Flask reactor for Laboratory glassware I. Product description: 1. Item:

100ml Pressure Equalizing Funnel, with PTFE Stopcock and Scale 24/29 Joint

$ 18.50
Be made of G3.3 borosilicate glass. This borosilicate glass with low linear coefficient of expansion is ideal choice for fabricating

105 degree Vacuum receiving tube, Standard mouth 24#*24#,Used for distillation unit

$ 11.53
Model Number: Vacuum receiving tube Upper ground mouth: 24/29 Lower ground stopper: 24/29 105 degree Vacuum receiving tube,Standard Ground Mouth.Standard mouth 24#*24#,Used for distillation

10L-20L-30L-50L Glass Reaction Kettle Accessory Cover Standard Size

$ 358.20
Classification: Laboratory Thermostatic Devices Explosion proof double layer jacket glass reactor is optional for 10l, 20l, 30l, 50l, 100l, 150l, 200l.

10ml To 1000ml Lab Glass Cylindrical Drip Separating Funnel

$ 14.60$ 45.41
10ml To 1000ml Lab Glass Standard Mouth Constant Pressure Funnel, Cylindrical Drip Separating Funnel 1. Item: Constant pressure separation funnel

10ml To 1000ml Lab Glass Standard Mouth Constant Pressure Funnel, Cylindrical Drip Separating Funnel

$ 16.14$ 39.15
1Piece 10ml To 1000ml Lab Glass Standard Mouth Constant Pressure Funnel, Cylindrical Drip Separating Funnel 1. Item: Constant pressure separation

150mm Medical Grade Boro Glass 3-neck Glass flask reactor head, Flask reactor head with three mouths

$ 57.72$ 59.12
I. Product description: 1. Item: Three-mouth Flask reactor head 2. Material: High Borosilicate 3.3 glass 3. Connect part’s diameter: 150mm

1Piece 25ml To 1000ml Glass Cylindrical Constant Pressure Dropping Funnel with GLASS Piston

$ 18.05$ 52.66
1Piece 25ml To 1000ml Glass Cylindrical Constant Pressure Dropping Funnel with GLASS Piston Laboratory Supplier 1. Item: Constant pressure separation

2000ML 1-Neck Reaction Flask,24/40,Separately Flask,2L Reactor

$ 141.00
2000ML 1-neck Reaction Flask,24/40,Separately flask with easily Clamp,2L reactor,includes the parts as below 1 neck glass cap 1PC 2L glass

2000mL Single-layer cylindrical flat bottom five-necked flask,Joint 24/29,Single-layer reactor bottle

$ 160.14
Classification: FlaskFAPEI Single-layer cylindrical flat bottom five-necked flask 2000mL,Joint 24/29,Single-layer reactor bottle,Oblique neck

24/29 150mm 3-Neck Glass Reactor Lid Three Necks Use for Reaction Flask Vessel

$ 69.99
Classification: FlaskModel Number: ReactorFlange OD: 150mmJoint: 24/29Material: Borosilicate GlassNecks: Three 24/29,150mm,Glass Reactor Lid,3-Necks,Use for Reaction Flask,Lab Glassware Central Joint is 24/29. Side Joints are all 24/29. ​Flange OD

24/29 Joint Lab Glass Straight Adapter With Glass Stopcock 125mm Length Ware

$ 4.50
Product Item:24/29 Joint Lab Glass Straight Adapter With Glass Stopcock 125mm Length Ware Material:Borosilicate Glass Joint:24/29 Overall Length:125mm Tube O.D:8mm

24/40 150mm 3-Neck Laboratory Glass Reactor Lid Three Necks Use for Reaction Vessel

$ 69.99
Classification: FlaskModel Number: ReactorFlange OD: 150mmJoint: 24/40Material: Borosilicate GlassNecks: ThreeEAN: 6971311079532 24/40,150mm,Glass Reactor Lid,3-Necks,Use for Reaction Flask,Lab Glassware Central Joint is 24/40. Side Joints are all 24/40. ​Flange OD

24/40 Joint, 250ML Two Neck Round Bottom Flask

$ 15.00
We can provide special shape,special capacity heavy wall laboratory glassware and other joint size. We have many kinds of laboratory

24/40 Soxhlet Extractor Laboratory Glass 100ML-250ML Oil Water Receiver-Separator

$ 29.88$ 39.90
Classification: Flask Description 100ml/250ml- 24/40 Soxhlet Extractor This oil water receiver-separator could be used on the essential oil steam distillation kit.

24# PTFE stir stopper for Glass reactor accessories

$ 10.47
Product name: Teflon/PTFE Standard Mixing Plug Stirring Plug/PTFE Stopper Joint,Material:Teflon/PTFE, Temperature resistance: -200-260℃, Size:14#~50#

250 ml Soxhlet Extractor dengan satu 24/40 250 MLBoiling Flask, 40/38 tanah bersama untuk extractor dan Kondensor, Lab Kaca

$ 34.57
250ml soxhlet extractor with boiling flask Distillation Lab Glass 24/40 40/38 1 Be made of G3.3 borosilicate glass. This borosilicate