4 pcs 4*4 inches tanks. bigger save tanks. Improve work efficiency and working continuously.
One Year warranty of the products of tube kit.
This system allows the user to build a solvent pressure by closing the valve, pulling a vacuum and filling the extractor, the Extractor will fill approximately 85% with solvent before the internal pressure equals the propellant pressure in the can.
Solvent can fit into any port with a Tip adapter supplied with some butane cans, Tip adapter required, not included
The Soak of the solvent is expected to be between 30-90 min, but it all depends on the material, from frozen solvent cans it is recommended
This system allows the user to soak the material before opening the bottom valve to release solvent and oil.
Description:
Construction: All major components made of 304 Stainless Steel.
316 Stainless Steel Heavy Duty Miniature Ball Valves System Rated to 1000PSI
Multiple port connections for 1/4″ 314 Stainless SAE 37 Degree
High Quality BUNA-N Gaskets are designed for Oil Processing
Operating Temperature Range: -30F to 200F
Max Vacuum -29.9inHg
High Polish Interior
High Pressure PTFE Braided Stainless Steel Hose
Vacuum clamps on all interfaces make cleaning easy. High Polish Interior
1.5 “x 20” (38mm x 500mm) tube type. Volume 613ml
Tubes contain 150g (5.3oz) of dry material (approximately)
Product details:
1 tube 1.5 “tri-clamp 16” (400mm) long made of 304 stainless steel.
4*4 inch (102mm)*4 inch(103mm) Bottomed Pipe bigger save tanks
2*1.5 “tri-clamp fitting FNPT 1/4”
2*4 “Single Pin Clamp 2×1.5 “Single Pin Clamp
1* 1.5 “tri-clamp screen gasket Viton 150 mesh stainless steel
1*1.5 ”Viton tri-clamp gasket
2*4 “tri-clamp Viton gasket
3 * JIC Adapter – 304 stainless steel NPT. 1/4 “size 3 x 316 Stainless Steel Heavy Duty Miniature Ball Valves System Rated to 1000PSI
1*4 “x 4” cap 1x 1/4 “FNPT
1*4 “x 4” cap 1x 1/4 “FNPT 1×1.5”
1 * 1/4 “FNPT 3-way fitting
1*72″(1.83m) braided hose
We could also custom style according your needs, welcome to consult.
FAQ
1.Are your extractors easy to clean and how often should they be cleaned?
Yes. The stainless steel component of the extractors should be cleaned after every extraction with 91% or higher isopropyl alcohol. Be sure to take special care when cleaning viton rubber gaskets as prolonged exposure to alcohol will degrade the gasket.
2.What is the application scope of extractor?
It depends on a range of variables including,but not limited to,the method of the extraction,the temperature of the solvent,the temperature of the material,and the quality of the material.Our extractors are able to provide the maximum scope from the material packed into the column.Alternatively,you can use the extractor to maximize quality of the product over the quantity.Therefore, it depends on the operator and the goal of the extraction.
