Model Number: ZNCL-TS 10000ml
ZNCL-TS 10000ml Lab Equipment Digital display magnetic laboratory heating mantle and stirrer
Description: temperature digital display, speed digital display.
Voltage: 220V, 50HZ.
Plug: Chinese plug.
Appearance: if the appearance color or shape change is the reason for product renewal, the function is the same.
The heating mantle is suitable for more than 70 degrees.
The magnetic pot depends on the heating material.
The room temperature is -99 ° for water, and the room temperature is -250 degrees for oil.
The surface temperature of the magnetic plate can reach 300 degrees.
heating mantles are more suitable for high temperature.
please the best is consult before place an order.
range of the adjustable speed:100-2500 rotation/minute,digital display the rotate speed
Power of the motor:40W，DC14-24V
Stirring capacity :50、100、250、500、1000、2000、3000、5000、10000、20000ml
Temperature controlling accuracy:±1℃
Temperature controlling mode:intelligent digital display,controlled silicon control,inner and outer temperature sensor.
Heating temperature:the surface temperature can be up to 380℃.
Boiling time:water for 10—25 minutes.
Insulation layer:alkali-free glass fiber,can bare 450℃
Insulation coefficient :relative humidity ≤35%,the coefficient≥500M
Heat preservation layer:Exclusive with aluminum silicate cotton vacuum calibrating environmental protection heat preservation body
Fuse pipe:ø5×20 15A
1.Use the heating units to heat,have the characteristics of large heating area ,heating uniform and heating fast ,and the maximum temperature can be 380℃.
2.can heat and stir 50-20000ml standard and non-standard reaction flask.
3.Adopt the fuzzy PID control algorithm to control temperature,have the functions of double screen digital display and self adjustment ,have high measure precision,small temperature impact and single key for soft-touch operation and use the inner and outer thermocouple to measure temperature.Use the controllable silicon to control the output ,160-240V voltage power supply can be used and thermocouple break protection is available.
4.Adopt PAPST series brushless DC motor,have stable performance ,low noise ,long service life and have no spark.
5.The shell adopts one time forming flame retardant strengthen PBT plastic injection shell,which is high-temperature resistant,anti-corrosion and has good insulation property.
6.30° bevel can control panel suitable for sitting and standing position angle.
7.Stepless speed,low stable,high strength.
8.Digital display speed function.
9.Equipped with over-temperature protection function.
Our main products are Laboratory Heating Mantle, Laboratory Heating Plate, Laboratory Heating Oil/Water Bath, Circulating Water Vacuum Pump, Low Temperature Reaction Bath, Low Temperature Cooling Fluid Circulating Pump, Rotary Evaporator, Glass Reactor, Magnetic Stirrer, High-pressure Reactor, Water Bath, Drying Oven, Ultrasonic Cleaning Machine, Lift Platform, etc.