Product Description:
1.Exclusively use square black crystal ceramic face plate heating surface heating, beautiful anti-corrosion.
2.Unique heating method (patent pending), the maximum surface temperature can reach 350 °C.
3.The temperature control adopts fuzzy PID control algorithm, dual-screen digital display, self-tuning function, high measurement accuracy, small flushing temperature, single-button light touch operation, internal and external thermocouple temperature measurement, thyristor control output, 160-240V Wide voltage power supply with break protection.
4.50-1000ml standard or non-standard reaction bottles can be heated and stirred.
5.Using German PAPST series DC brushless motor, the performance is stable, the noise is small, the service life is long, and no spark is generated.
6.The outer casing is made of one-time flame-retardant reinforced PBT injection molded casing, which is resistant to high temperature, corrosion and good insulation performance.
7.30° bevel control panel for seat and station viewing angles.
8.Stepless speed regulation, low speed and high speed.
|
Product name |
Magnetic stirring heating plate |
|||
|
Series number |
ZNCL-BS |
|||
|
Model number |
ZNCL-BS140 |
ZNCL-BS180 |
ZNCL-BS230 |
ZNCL-BS280 |
|
Power voltage |
220V/50HZ |
|||
|
Motor Power |
Motor 40W DC14-24V |
|||
|
Stirring speed range |
50-2000 rpm |
|||
|
Heating plate size |
140*140 |
180*180 |
230*230 |
280*280 |
|
Heating Power |
350W |
500W |
800W |
1200W |
|
Match beaker capacity |
50-500 ml |
50-2000 ml |
50-3000 ml |
50-5000 ml |
|
Heating plate material |
Black crystal ceramic |
|||
|
Heating Temperature |
Room Temp – 380℃ |
|||
|
Overheating protection |
390℃ automatic protection |
|||
|
Temp control method |
Thyristor control,Internal, external sensor. |
|||
|
Tempe control accuracy |
±1℃ Intelligent digital display. |
|||
|
Size |
325*215*120mm |
325*215*120mm |
430*270*150mm |
500*330*150mm |
|
Weight |
3200±200g |
4500±200g |
6000±200g |
7500±200g |
|
Working Time |
Can continuous working |
|||
Precautions:
1.Do not use dry burn.
2.Do not ground the cable for safe use.
3.In order to extend the use of the product, all the magnetic stirrer motors have a fan heat dissipation function. Therefore, when heating experiments, especially high temperature heating tests, the instrument cannot be used for heating alone, and the motor should be adjusted to rotate or medium speed. State (or idling) to prevent damage to the motor and electrical appliances from high temperature radiation. If the motor cannot start to rotate, it should be promptly found to be repaired by the dealer. Otherwise, it will not be damaged or lost due to the operation, and will not be responsible.
4.When the high temperature heating is finished, please turn off the heating first, and then turn off the stirring after leaving the temperature for a few minutes.
5.The temperature of the heating part is high, so be careful when working to avoid burns.
6.If there is wet hands, liquid overflow, or leakage caused by excessive humidity for a long time, it should be dried in time or naturally dried before use to avoid danger;
7.When not in use for a long time, please store it in a dry and non-corrosive gas.
8.When the ambient humidity is relatively large, inductive electricity may be transmitted to the outer casing through the insulation layer. Please use the grounding wire to avoid leakage and pay attention to ventilation.
9.Relative humidity: 35%-85% (no condensation).
10. Insurance tube Φ5 × 20 15A.
