The 50L Dual rotovap recovers solvents efficiently and fast with two times the surface area for condensing and twice the recovery volume.
| 50L Dual Condenser Rotary Evaporator SPECIFICATIONS | |||
| High performing | • Fast distillation due to high heating capacity • Large batches in a flask of 10, 20, 30, 50 and 100 liters • We offer the following related product for completing your portfolio1) Recirculating Chiller 2) Water Circulating Vacuum Pump 3) Diaphragm Pump 4) Vacuum Controller |
||
| Easy and safe | • Intuitive operation of the Rotary Evaporator and its vacuum controller(optional) • Excellent handling by large and easy readable display • Easy flask handling due to the unique flask coupling• Safe handling and spring loaded valves protect the glass |
||
| Durable | • Long life time due to exclusive use of corrosion-free stainless steel • Low maintenance by using high chemical resistant materials • Trouble-free operation thanks to robust industrial valves |
||
| Especificações | |
| Requisitos eléctricos | 110V 220V 50/60Hz, Single Phase
RE-5210 (10L): 17.3A, 3800 watts |
| Material de vidro | Vidro alto de borossilicato 3.3 |
| Evaporating Flask | Maximum Load: Not to exceed 60% of the flask’s capacity Sealing Flange: 4.9” diameter Rotation Speed: 10 to 120 RPMRE-5210 (10L): Capacity: 2.6 gallon (10 liters or 0.35 cu ft) Evaporating Speed: 0.75 gallon/hour (water), 1.5 gallon/hour (alcohol)RE-5220 (20L): Capacity: 5.28 gallon (20 liters or 0.7 cu ft) Evaporating Speed: 1 gallon/hour (water), 2 gallon/hour (alcohol) RE-5250 (50L): |
| Receiving Flask | RE-5210 (10L): 1.3 gallon (5 liters or 0.18 cu ft) RE-5220 (20L): 2.64 gallon (10 liters or 0.35 cu ft) RE-5250 (50L): 5.28 gallon (20 liters or 0.7 cu ft) |
| Condensador | Glassware: Main + Auxiliary triple-circulating cold traps, vertical Chilling fluid connection: 3/8” hose barb * 4 (2 on main + 2 on auxiliary)RE-5210 (10L): Main Condenser: 3,900 cm^2 Auxiliary Condenser: 2,530 cm^2 RE-5220 (20L): Main Condenser: 9,480 cm^2 Auxiliary Condenser: 3,580 cm^2 RE-5220 (20L): Main Condenser: 11,500 cm^2 Auxiliary Condenser: 4,000 cm^2 |
| Water Bath | Temperature Range: RT to 99°C (210°F) Temperature Controller: Digital Material: Stainless Steel Media: Distilled Water or Oil (Dual-Purpose) Max. Water Level: Not to exceed 1” from the top rim of the bath Number of heaters: 2 Drain Port: 1 Exterior Liner: rubber Lifting: MotorizedRE-5210 (10L): 12.5” diameter * 11” height RE-5220 (20L): 17.5” diameter * 12” height RE-5250 (50L): 22.1” diameter * 12.2” height |
| Vácuo | Vacuum Level: < 3 torrs Vacuum Sealing: PTFE + Viton Gaskets Vacuum Connection: Glass hose barb on top of main condenser |
| Swivel Casters | Four, built-in with locks New swivel casters can be securely adjusted to accommodate uneven floor |
| Safety | Dry-Run, Over-Temp shut-off, built-in circuit breakers |
| PACKING LIST | |
| 50L Rotary Evaporator Base |
1 conjunto |
| Main Condenser |
2 pcs |
| Auxiliary Condenser |
2 pcs |
| 50L Boiling Flask |
1 pc |
| 20L Receiving Flask |
2 pcs |
| 50L Flask Cover |
1 pc |
| Four-Way Bump Trap |
1 pc |
| Vapor Duct with Seal (Pre-Installed) |
1 conjunto |
| PTFE Vacuum Sealing Kit (Pre-Installed) |
1 conjunto |
| Glass Vacuum Port with PTFE Valve |
6 sets |
| Glass Feeding Tube with PTFE Valve |
2 sets |
| PTFE Feeding Tube Extension Hose |
1 pc |
| Vertical Stand |
2 pcs |
| Vacuum Gauge |
1 pc |
| Support Ring |
4 pcs |
| Rubber Strap for Condenser |
2 pcs |
| Clamp with PTFE Gasket |
16 sets |
| Evaporating Flask Screw Aid |
1 pc |
| Allen Key |
2 pcs |
| 63A Fuse |
1 pc |
| Screw Nuts for Clamps |
2 pcs |
| Springs for Clamps |
2 pcs |
| Gasket for Clamps |
4 sets |
| Vacuum Hose |
10ft. |
This unit provides consistent and repeatable results at an affordable price. With dual condensers and dual receiving flasks made of GG-17 High Borosilicate Glass, all pieces have been designed for efficient use of surface area and higher capacity’s. This means faster recovery without compromising quality. Our evaporators come standard with safety features such as over-temperature shut off and dry-run protection. All valves and ports are high efficiency allowing a continuous feed of material as well as draining the receiving flask without breaking vacuum.
No expense has been spared with these evaporators, yet we crush the market on pricing to provide great value at a low cost. Our evaporators are the best value on the market and each one comes with fantastic customer service, local product support.
*This Unit comes with a 90 day warranty*
We ship all glassware products with additional care, but sometimes they arrive broken. If glassware arrives broken, please contact us within 3 days of receiving your product and we will either send you a brand new piece or send you a refund! Any glassware broken after delivery voids all warranties. Thank you for understanding!
Para Apoio Técnico, Perguntas, ou Outras Questões, por favor envie-nos um e-mail ou ligue-nos!
Português 
English 
Deutsch 
Français 
Italiano 
Русский 
Español 
Bahasa Indonesia