Customized would be availible
Made by hand blowing
Made of borosilicate glass 3.3
Customer’s Logo would be available for bulk order
Description:
This is a set of 24/40 glassware for distillation in lab. With a 14/20 joint to accept thermometers calibrated for 75mm immersion.
The distributing adapter consists of a single 24/40 outer joint and three 24/40 inner joints to accept three 150mL Kjeldahl flask receivers.
The receivers are held in place with plastic clamps. Including:
1.Distillation head, short path with 24/40 joint, with a 14/20 outer joint to accept thermometers calibrated for 75 mm immersion.one piece design for easy set up.
with removable hose connector.
2.Distributing adapter, distillation receiver, with the24/40 outer and inner joints at 135 degree angle.
with removable hose connector
3.Kjeldahl flask receivers with24/40 joint 3 pcs
4.1000mL 3 neck flask, heavy wall design, with 24/40 joint, 1 pcs.
5.plastic joint clip, 24/40, for standard taper joint.(Pack of 10)
6.thermometer adapter, 24/40 joint. 1pcs
7.thermometer adapter, 14/20 joint. 1pcs
8.65mm Outer diameter Cold Trap,24/40.1pcs
9.250ml receiving flask,24/40.1pcs
10.Bleeding tube.2pcs.
11.Penny-Head Hollow Glass Stopper.1pcs
12.Yellow back Thermometer.1pcs
13.All of the stands in the picture
If you need any other size or other Ground joints,please contact with us
Be Made From G3.3 Borosilicate Glass
Annealing Point ——560℃
Linear Coefficient of Expansion—— 33×10-7/℃
Softening Point——820℃
