The USA Lab Single Jacketed Glass Reactor turnkey system is the best reactor kit on the market. This 100l glass reactor system comes with a USA Lab Heater chiller that can bring your reactor down to a freezing temperature of -40°C and all the way back up to the high temperature of 200°C. This allows users to have accurate temperature control and a large range of temperature for a variety of applications.
|
Modelo |
GR-100L |
GR-150L |
GR-200L |
|
|
Volume(L) |
100 |
150 |
200 |
|
|
Jacket volume(L) |
30 |
50 |
60 |
|
|
Condensation area(m²) |
1.1 |
1.3 |
1.6 |
|
|
Feeding tank volume(L) |
2L |
|||
|
Recovery tank volume(L) |
20 |
|||
|
Kettle cover diameter |
Impeller diameter |
60# flangetype |
||
|
Temperature sensor diameter |
40# flangetype |
|||
|
Condenser connection |
50# spherical grinding |
|||
|
Liquid feed inlet |
34# standard grinding×1 |
|||
|
Feeding tank interface |
40# standard grinding |
|||
|
Solid feed inlet |
80# flangetype |
120# flangetype |
||
|
Glass assembly |
Vidrio de borosilicato alto 3,3 |
|||
|
Main frame |
SUS304 |
|||
|
Stirring paddle |
Paddle agitator, internal stainless steel, external polytetrafluoroethylene (PTFE), titanium |
|||
|
Motor |
For viscous materials, high-power motors can be used |
|||
|
Método de desplazamiento |
Lockable casters |
|||
|
Working temperature(℃) |
-120℃~300℃ |
|||
|
Maximum temperature difference(℃) |
≤60 |
|||
|
Pressure in kettle(MPa) |
-0.1~0.1 |
|||
|
Jacket pressure resistance(MPa) |
≤0.1 |
|||
|
Pressure rise rate of vacuum system |
≤2kPa/h |
|||
|
Mixing motor power(W) |
Common 200W/ explosion proof 370W |
Common 400W/ explosion proof 750W |
Common 750W/ explosion proof 750W |
|
|
Speed regulation mode |
Frequency control |
|||
|
Speed adjustment range(rpm) |
0~600 |
|||
|
Temperature sensor |
PT100 |
|||
|
Temperature display accuracy(℃) |
±0.1 |
|||
|
Temperature range |
Water: RT~90℃ |
|||
|
Oil: RT~300℃ |
||||
|
Interface size of stainless steel insulation hose |
½in external screw thread |
¾in external screw thread |
||
|
Seal material |
PTFE |
|||
|
Installation height of discharge valve(mm) |
450 |
330 |
330 |
|
|
Potencia |
220V/110V,50/60Hz |
|||
|
Environment temperature(℃) |
5~35 |
|||
|
Relative humidity(%) |
≤ 65 |
|||
|
Tamaño (mm) |
800W×710D×2600H |
1240W×1140D×3100H |
||
|
Weight(kg) |
128 |
175 |
190 |
|
No expense has been spared with this reactor turnkey system, yet we crush the market on pricing to provide great value at a low cost. Our reactor turnkey systems are the best value on the market and each one comes with fantastic customer service, local product support and a 1-year warranty.
Bring your lab to the next level and get started with a USA Lab single jacketed reactor turnkey system today!
The USA Lab UHC heater chiller is a powerful -40°C to 200°C Heater Chiller with a medium sized Reservoir. This heater chiller is ideal for applications involving vacuum systems, jacketed reactors, rotary evaporators, columns, solvent tanks, and even analytical instruments. These units are “Closed loop” and have a small in-feed hole allowing for the entire fluid reservoir to be closed off from the outside environment. The UHC heater chillers have easily accessible control panels for easy adjustments and repair.
The USA Lab UHC heater chillers offer unbeatable performance, ease of use and high reliability. These units keep quiet despite having a powerful pump allowing for constant flow rates to match the needs of demanding applications.
The USA Lab UC Chiller is a powerful Chiller with a large Reservoir. This chiller is a true lab chiller than is ideal for applications involving vacuum systems, jacketed reactors, rotary evaporators, columns, solvent tanks, and even analytical instruments.
The USA Lab UC chillers offer unbeatable performance, ease of use and high reliability. These units keep quiet despite having a powerful pump allowing for constant flow rates to match the needs of demanding applications.
Three-Stage Chemistry-Design Diaphragm Pumps are an excellent solution for continuous, oil-free pumping of corrosive gases and vapors and meet even challenging requirements. The three-stage design provides the advantageous combination of high pumping speed and very low ultimate vacuum. All parts of the MD 4C NT in contact with pumped media are made of chemically resistant fluoroplastics. Well-proven PTFE sandwich diaphragms provide increased reliability and extended operating life. Due to the gas ballast valve and its very good ultimate vacuum (even with gas ballast) the MD 4C NT is also suitable for pumping condensable vapors of high-boiling solvents.
Performance Features
Outstanding chemical resistance and superior vapor tolerance
Exceptionally high performance even at low vacuum
Excellent ultimate vacuum even with gas ballast
Whisper quiet and very low vibration
Long diaphragm life, maintenance-free drive system
Enviamos todos los productos de cristalería con sumo cuidado, pero a veces llegan rotos. Si la cristalería llega rota, póngase en contacto con nosotros dentro de los 3 días siguientes a la recepción de su producto y le enviaremos una pieza nueva o le reembolsaremos su dinero. Cualquier cristalería rota después de la entrega anula todas las garantías. Gracias por su comprensión.
Please don’t hesitate to contact us with any questions or concerns you might have.
Para asistencia técnica, preguntas u otros problemas, envíenos un correo electrónico o llámenos.
Español 
English 
Deutsch 
Français 
Italiano 
Русский 
Português 
Bahasa Indonesia