Rotary lift double-layer glass reaction kettle can be equipped with ZN intelligent biochemical reaction device produced by our company, which can reflect the temperature value, acidity value, viscosity value (torque), stirring speed value and paragraph programming control of the reaction material in real time; Control the speed and time of the feeding pump; connect with the computer to realize the functions of remote real-time data acquisition, control, recording and curve drawing.
Specifications of 10L Electric Lifting Glass Reactor
|110V 220V 50/60Hz
|High Borosilicate Glass 3.3
|Reaction Glass Vessel Capacity
|6LCooling/Heating Jacket Capacity
|Dual-Layer Cooling Layers
Chilling Fluid Connection: GL26 hose barb
Condensation Area: 0.341 m²
Optional: condensation area can be customized
Receiving Flask: none
Optional: receiving flask capacity can be 5L, 10L
|Capacity: 2000 ml
Glass Valve with PTFE Open/Close
Optional: Jacketed Feeding Funnel
Optional: Powder Feeding Funnel
Optional: Peristaltic Pump Feeding
1) Solid Materials Feeding: 95#
2) Stirrer: 50#
3) Cleaning: DN25
4) Temperature Probe: DN25
5) Condenser: S50/20
6) Vacuum Port: 34/34
7) Feeding Funnel: 40/40
|All stainless-steel parts are SUS304 type.
(Refused to use the 201-type stainless steel)
Optional: can be coated by PTFE to improve the corrosion resistance
|-80°C ~ +200°C
|Internal & External
| ≤ 80°C
(Resistant to sudden temperature changes)
|Vacuum Inside of Reaction Glass Vessel
|-0.1 ~ 0.0 MPa
|Vacuum Inside of Jacket Layer
|≤ + 0.03 MPa
|Digital controller with variable frequency drive
Rotation speed: 50 to 600 rpm
|PT100 (Realtime display the materials temperature)
|PTFE Stirring Seal Kits
(Ceramic Bearing, Anti-Corrosion, Wear-Resistant)
|Type-304 stainless steel reinforced PTFE
|Insulated Connection Hose
|Oil Drain Manifold Kit
(Simple and easy draining of the circulator fluid)
(Limit strain on the glassware from the heavy insulated oil hoses)
|Flush seal design with large opening and flat flange clamp
|Heating & Cooling Circulator
|Temperature Control Range: -60 ~ 200 °C
Heating Power: 6000W
Cooling Capicity: 4820W-1380W
Circulation Pump Flow: 35L/Min
Pump Lift: 11 meters
Safety: Compressor over-temp protection
Compressor delay start protection
Oil-free, corrosion resistant, reliable
All major valves and parts made of PTFE, ideal for chemical-related operation
No oil changes, no cold trap required for water/alcohol solutions
Pumping Speed: 20L/Min
Flow Rate: 60L/Min
Tank Capacity: 15L
Product features of 20L Electric Lifting Glass Reactor：
Jacketed reactor; high borosilicate glass (GG17) material
Working volume: 10L
Split lower discharge valve
Kettle cover: can be installed with stirrer, constant pressure dropping funnel, reflux condenser, temperature sensor, solid feeding, liquid feeding, etc.
The kettle cover and the kettle body are connected by handwheel lifting and extrusion type sealing.
All parts in contact with liquid are made of borosilicate glass or PTFE, which has excellent corrosion resistance.
The design of parallel steel base makes the fuselage run more stably. This unit is equipped with casters for easy mobility.
The entire system can be moved simultaneously, ensuring stability and flexibility.
The overhead mixing system ensures the stability of the whole set of equipment.
Double sealed bearings ensure high sealing of the system.
Available in glass, stainless steel, and PTFE-coated fluorine
The stirring paddle is made of PTFE and double-layer stirring. The stirring paddle can be replaced according to the experimental requirements.
Various models of vacuum pumps and pressure pumps are available.
Diaphragm vacuum pump
Rotary Vane Oil Sealed Vacuum Pump
Circulating water type multi-purpose vacuum pump
4. Temperature Control
Display stirring speed; frequency conversion; constant speed stirring; stable operation.