Tool-Free™ Jacket Connection Design Allows Hose to be Attached or Removed by Hand Without Using Tools
Chemically Resistant Perfluoro O-Rings on All Drain Valves
Graduation Scale on Both Sides Showing the Approximate Volume
Sidearm on Lower Drain Valve can be Used with a Standard 1/2” or 3/4” TFE, PFA or Polypropylene Compression Fitting
All Vessels are Serial Numbered
Jacketed reaction vessel with graduation scale on both sides. Inlet/outlet has our tool-free flat flange connector. No Tools Are Necessary to attach hose fittings to the inlet and outlet of the jacket. Vessels with capacities 300mL to 1000mL are available with our new 0-14mm drain valve supplied complete with one-piece plug and control knob with red indicator band used for high temperature applications up to 230° C. A low temperature plug and control knob, designated by a blue indicator band, is available as an optional item listed below, and can be used down to -60° C.
Vessels with capacities 2L and larger. Both valves are designed to seal flush with the bottom of the flask avoiding the dead space normally associated with stopcock drains. This feature permits total mixing and draining of the contents of the reactor. Reaction vessel is constructed with a flange having a groove formed in the sealing surface of the flange. Flange is also ground to permit a greased seal.
Please note: tool-free jacket fittings must be ordered separately