S212-100L double-layer glass reactor’s reaction flask volume is 100L, interlayer volume is 18L, stirring diameter of axle is 15mm, power of stirring is 200W. S212-100L double-layer glass reactor is an audacious product who has combined advantages of domestic and foreign like products, it adopts double-layer glass design, put reaction solvent in internal layer to do stirring reaction, connect different cold and heat sources(refrigerating fluid, hot water or hot oil) to interlayer to do cyclic heating or cooling reaction. Under set constant temperature condition, you can conduct stirring reaction under normal or negative pressure in airtight glass reactor, as well as conducting backflow and distillation of reaction solution.
This glass reactor series mainly contains following parts: double-layer glass reaction kettle, a set of component cover of glass reactor, condenser, constant voltage funnel, frequency conversion controller, rotate stirring and sealing system, stainless steel frame system, etc.
The 100L Squatty, Low Profile, glass reactor system with 400mm flange. 100L glass reactor system on our innovative support frame. safety shields surround the reactor with the front panel hinged for easy access.
Complete 100L Reactor System Features:
More Clearance: 100L Squatty Glass Reactor System with 400mm Flange Maximizes Clearance Under The Drain Valve
Wider Access: 400mm ID Flange Provides Wider Access For Insertion or Probes, Baffles and Other Accessories without Interfering with Agitators
Heavy Duty 2″ Diameter Solid Stainless Steel Uprights and Heavy Duty PTFE Coated Aluminum Fittings Provide Maximum Strength and Chemical Durability
Digital Temperature Monitor
Heavy Duty Chemically Resistant Frame: Universal Motor Mount for Electric, Air, or EX Motors: Design Provides Greater Accessibility
Electric Motor and Controller: Electric and EX Motor has Separate Controller with Digital Display
Reactor Jacket Graduation Scale on Both Sides
Large Detachable Drain: 3″ Beaded Pipe Zero Dead Space Detachable Drain Valve has Knob With Laser Etched Directional Arrows for Open and Close
7-Neck 400mm Inside Diameter Lid with Large 80mm Powder Addition Port
Reactor Support Plate Holds Reactor Securely and Allows Easy Installation/Removal
Safety Shield On All Four Sides
Pressure Relief Manifold System: Supplied with CG-1969-M High Flow Pressure Relief Manifold System With Insulated Hoses and Bulkhead Fittings
Mobile: Large Swivel Casters with Locking Mechanisms