HUIGONG Group-series single/dual jacketed glass reactors are designed for synthetic reaction of different types of materials in a controlled temperature and vacuum environment. Each reactor features adjustable stirring speeds and a constant pressure feeding funnel that allows you to add material to the vessel at a uniform and controlled speed. The built-in condenser makes it possible to recover some materials, also at a controlled rate of speed.
Technical Parameter of Pharmaceutical Reactor
|Frame material||Stainless Steel|
|Pipe fitting material||304 Stainless Steel|
|Move method||Universal castors with braking|
|Reaction flask volume||20L|
|Flange type oil in and out circulation port||Enter from low port, come out from high port|
|Number of reactor bottle||6|
|Discharge outlet liftoff height||450mm|
|Reactor reaction temperature||-80-250 degree|
|Stirring diameter of axis||12mm|
|Boundary dimension (mm*mm*mm)||560*560*2100|
|Package Dimension(mm*mm*mm)||1480*660*810 0.80m³|
|Functional Configurations||Speed adjustment mode||Electric stepless speed regulation|
|Electrical machine configuration||Low speed reinforcement electrical machine, speed ratio 3:1|
|Rotate speed display mode||Liquid crystal digital display|
|Temperature display mode||PT100 sensor digital display|
|Sealing mode||PTFE sealing, ¢50 flange stirring mouth|
|Condenser||Vertical high efficiency double backflow condenser pipe 100*670mm, 40# standard mouth|
|Backflow (distillation) device||Backflow elbow is equipped with discharge switch, 50# ball milling mouth|
|Dropwise adding device||1L constant voltage funnel, 40# standard mouth|
|Depression device||34# standard mouth reducing valve|
|Temperature testing tube||24# standard mouth|
|Solid charging||¢80 flange mouth with PTFE cover|
|Discharging method||Inclined glass discharging valve, ¢80 flange mouth|
|Vacuum display mode||Vacuum meter|
|Stirring connecting method||Universal joint connecting|
|Stirring bar||Anchor type and push type stainless steel bar, covered with PTFE|
|Optional Configurations||Main body support||Tray type|
|Collecting device||Collection bottle|
|Anti-Explosion||Anti-explosive frequency changer, anti-explosive electric machine EX180W 0-1400 rotate|
|Frame part||Spraying plastics pr PTFE|
|Heat insulation device||Cotton insulation|
|Sealing part||Ceramic bearing, mechanical sealing|
|Condenser||Horizontal type condenser can reduce overall height|
|Reactor cover||Custom-made PTFE reactor cover|
|Our company’s laboratory glass and laboratory instruments are independent research and development, available for custom-made according to client requirements.|
|Jacketed glass vessel, lid, clamps and heavy duty stainless steel stand with casters (shipped pre-assembled)||1 set|
|Glass vessel insulation jacket with openable viewing window||1 each|
|Vertical condenser with dual cooling coils, 2 chilling fluid ports and 1 vacuum port, glass||1 each|
|Glass condenser dispenser with drain port and PTFE open/close valve||1 each|
|Glass material feeding funnel, lid, and PTFE open/close valve||1 each|
|1″ glass drain port with PTFE open/close valve||1 each|
|Glass vacuum valve||1 each|
|Stirring motor controller with material temperature display||1 each|
|Stirring motor and motor support||1 each|
|Mechanical vacuum gauge with two 3/8″ hose barb ports||1 each|
|Temperature probe with PTFE seal||1 each|
|PTFE stirring blades, stainless steel rod with PTFE liner||1 each|
|Insulated hose with drain port & open/close valve||2 each|
|3/8″ Stainless steel hose barb adapters||2 each|
|PTFE sealing tape||1 each|
|PTFE stirring rod positioner/bearing kit||1 each|
|Condenser dispenser connection kit||1 each|
|Large opening material feeding port kit||1 each|
|Bottom drain port sealing clamp||1 each|
|Rubber-wrapped condenser dispenser support and condenser bracket||3 each|
|Chilling fluid connector x 2, vacuum connector x 1||3 each|
|Allen key and backup inner hex screws||1 each|
|Users manual||1 each|
System includes a high quality thermo insulation jacket with open/close viewing window and top/bottom adjustable drawstrings, specially designed and made for glass jacketed reactors. These jackets will extend chiller life, allow you to go down to a lower temperature, and also cut your utility bill.
Dual jacketed model allows you to draw vacuum from the outer jacket, thus protects your recirculating fluid temperature and gives you best control over your work. It also help prevents frost to form on the outside of the vessel, allowing you to see clearly into your material.
Solvent-resistant PTFE on all sealing components ensures long time durability and operation.
All glassware is hand-made from food grade high borosilicate glass that is heat/cold/corrosion-resistant.
Adjustable stirring rate provides great torque or high speed.
Patented PTFE stirring rod bearing for reliable and quiet operation.
Optional multi-layer stirring blades for optimal reaction results.
Wide range of temperature operations, from -110F to 400F.
Large condenser cooling surface for exceptional condensation performance.
Rugged stainless steel reinforced PTFE stirrer with anchored agitator, suitable for a wide range of viscous materials.
Easily visual operation with digital speed and temperature displays.
Heavy duty stainless steel supporting framework with lockable casters for mobility and stability. (whole support and glass vessel shipped pre-assembled)
One year warranty and lifetime US-based parts, service, and support.
Your safety is important to us! Please use caution when operating. Users of glass reaction equipment must take all necessary precautions to avoid contact with rotating parts, particularly entanglement of loose clothing, hair, necklaces, or other jewelry. Under these circumstances, the winding action of the rotating parts can draw the user(s) into the apparatus, resulting in breakage of glassware, burns, and/or chemical exposure. Extra caution must also be taken when operating with air-reactive materials, especially under vacuum. A leak can draw air into the apparatus and cause a violent reaction to occur.