|10L~200L Jacketed Glass Reactor|
on The Lid
|5+1 / 6+1 or Customized|
|Height of Kettle||450mm||550mm||730mm||850mm||950mm||980mm||1050mm|
|Constant Pressure Drop Funnel||1000ml||2000ml|
|Power Supply||220V / 50Hz or Customized|
|Glass Material||High Borosilicate Glass 3.3|
|Frame Material||304 Stainless Steel|
About 20l chemical lab jacketed glass pilot reactor mixer
The 20l chemical lab jacketed glass pilot reactor mixer has been widely used in chemical reaction, combination, separation and concentration. Different heating or cooling liquids, such as water or oil, can be injected in the interlayer of lab glass reactor for providing a constant temperature for reactions. It also can provide excellent mixing in the jacketed heating reactor under positive or negative pressure. The transparent glass structure can be helpful to monitor the complete reaction.
Note: reactor stand overall height with motor and clearance below valve, are calculated for all chemglass stirrer bearings, including the CG-2077-M mechanical seal stir bearing.
This Jacketed glass reactor can be used for vacuum stirring reaction, high temperature and low temperature reaction, constant speed operation mixing reaction, distillation, reflux, concentration reaction , negative pressure operation and so on.
Jacketed glass reactor capacity range:1L,2L,3L,5L,10L,20L,30L,50L,100L,150L,fully meet the request of small laboratory experiments and pilot production in plant.
As the chemical industry,chemical,drugs and the rapid development of mew compounds,greatly improving the efficiency of chemical,providing the body from the simple to the complex process reactor reactor required systems,products with recycler water vacuum pumps,diaphragm vacuum pumps,temperature cycling device,a one-stop support for freedom to expand your ideal reaction.
Open Frame Design Provides Excellent Accessibility
Support Frame with Oversized Rugged S.S. Uprights and Heavy Duty PTFE Coated Aluminum Fittings
Improved Support Clamp Auto-Centers Reactor and Lid Allowing Quick Installation/Removal Of Reactor
Perfluoro O-Rings On 60mm and 200mm Flanges
S.S. Inlet/Outlet Adapters Available In M16 x 1 and M30 x 1.5 Allow Connection To Cooling/Heating Circulator
Lower Support Plate, and PTFE Ring, Have a “V” Shaped Opening Allowing An Unobstructed View Of Bottom Valve
Zero Dead Space Detachable Drain Valve Has Knob with Laser Etched Directional Arrows For Open and Close
Electric or Air Motor. Optional XP Motor Available
5-Neck Lid with Large Powder Addition Funnel
Digital Temperature Monitor
Electric Motor Has Separate Digital Controller
Reactor Jacket Graduated On Both Sides
Removable S.S. Pipe Used To Support Side Shelf and Manifold System
Support Bushings For Optional Safety Shield
Heavy Duty Lockable Casters