Customized would be availible
Made by hand blowing
Made of borosilicate glass 3.3
Customer’s Logo would be available for bulk order
Description:
This is a set of 24/40 glassware for distillation in lab. With a 14/20 joint to accept thermometers calibrated for 75mm immersion.
The distributing adapter consists of a single 24/40 outer joint and three 24/40 inner joints to accept three 250mL Round bottom flask receivers.
The receivers are held in place with plastic clamps. Including:
1.Distillation head, short path with 24/40 joint, with a 14/20 outer joint to accept thermometers calibrated for 75 mm immersion.one piece design for easy set up.
with removable hose connector.
2.Distributing adapter, distillation receiver, with the24/40 outer and inner joints at 135 degree angle.
with removable hose connector
3.Round Bottom flask receivers with 24/40 joint 3 pcs
4.2000mL 2 necks flask, heavy wall design, with 24/40 joint, 1 pcs.
5.Cold Trap 24/40,with removable hose connector,1pcs
6.500ml Receiving Flask,24/40,1pcs
7.thermometer adapter, 24/40 joint. 1pcs
8.thermometer adapter, 14/20 joint. 1pcs
9.Bleeding tube.2pcs.
10.Penny-Head Hollow Glass Stopper.1pcs
11.Accuracy Yellow back Thermometer.1pcs
12.110V 50/60HZ,450W, Digital Magnetic Stirring 2000ml Heating Mantel,1pcs
13.All of the clamps and stand in the picture
Be Made From G3.3 Borosilicate Glass
Annealing Point ——560℃
Linear Coefficient of Expansion—— 33×10-7/℃
Softening Point——820℃
