100-300ml PPL Lined Hydrothermal Synthesis Autoclave Reactor 3Mpa High Pressure Digestion Tank Lab Reactor Supplier
1, High quality Stainless steel structure, durable and gas-tight
2, Elegant design, easy to operate
3, PTFE inner chamber to minimize corrosion
4.Material :304 stainless steel shell,PPL Lined
1. Operating temperature: 300 degree Suggesting temperature: 280degree
2, Working pressure: 3Mpa (gauge) Suggesting pressure: 2MPa (gauge)
3, Heating, cooling rate: 5 degree/min
Hydrothermal synthesis reactor, also known as digestion, pressure melting bombs, hydrothermal synthesis reactor, high temperature and pressure digestion vessels, PPL high-pressure tank is in a certain temperature and pressure conditions, certain synthetic chemicals supplied reactor. It is widely used new materials, energy, environmental engineering and other fields of scientific research and experiments, is university teaching, scientific research units commonly used small reactors.
methods of operation
The reaction means and the reactor body, and to ensure feeding coefficient is less than 0.8. When the Department of corrosive reaction when you want to put PPL bush, can only be assured kettle body from corrosion. Hydrothermal synthesis reactor will be placed on the heater, in accordance with the provisions of the heating rate of heating to the desired reaction temperature (less than the required safety temperature). Completion of the reaction will be when its cool, but also in strict accordance with the provisions of the cooling rate operation, to facilitate the safety and reactor life. When confirmation of intra-abdominal temperature below the boiling point solvents reaction system can only open the tank lid after a follow-up operation.
Hydrothermal synthesis reactor each time after use to clean, to avoid corrosion.
Kettle body, kettle lid seal line to pay particular attention to clean and prevent damage to the bumps.
We are not responsible for any custom duty or import tax, it is buyer`s responsibility.