Product features of high pressure reactor:
The hydrothermal synthesis reactor is also called a polymerization reactor, a high pressure digestion tank, a high pressure tank,a reaction kettle, a pressure melt bomb, a digestion tank, a hydrothermal synthesis kettle, and an experimental reaction kettle.
The hydrothermal synthesis reactor is a closed vessel capable of decomposing poorly soluble substances. It can be used for pretreatment of sample in atomic absorption spectroscopy and plasma emission analysis; it can also be used for small-dose synthesis reaction; it can also use the environment of strong acid or alkali in the tank and high temperature and high pressure to close the environment to achieve rapid digestion of poorly soluble substances.
Sample preparation is performed in chemical analysis methods such as gas phase, liquid phase, plasma mass spectrometry, atomic absorption, and atomic fluorescence. It is a good assistant for digesting samples when measuring trace elements and trace elements. It can be used in the determination of heavy metals such as lead, copper, cadmium, zinc, calcium, manganese, iron, mercury, etc.
It can also be used as a high temperature resistant, high pressure, anticorrosive and high purity reaction vessel, as well as organic synthesis, hydrothermal synthesis, crystal growth or Sample digestion and extraction. Pre-treatment of samples to digest heavy metals, pesticide residues,food, sludge, rare earths, aquatic products, organic matter, etc.
Specifications of 100L Electric Lifting Glass Reactor
|TOPT-HT10||1. Shell made of quality stainless steel.304L
2. Liner materials is special PTFE.
|10ml||1. Safe temperature is 200°C.
2. Working pressure ≤3 Mpa (surface pressure).
3. Tempe heating and cooling speed: ≤ 5℃/ min.
4.Break down the refractory material quickly.
Liner made of polytetrafluoroethylene (PTFE referred to F4), which features:
1. PPL lined with high temperature resistant material: using temperature – 200 ~ + 300 ℃
2. Made by high temperature sintering and cooling, resistant to strong acid, strong alkali and organic solvents, better temperature resistance than PTFE products, the appearance of extreme technology, dark brown, non-crack surface, beautiful appearance.
3. The outer body material is 1Cr18Ni9Ti (national standard stainless steel) process, adopt round mortise seal, manual screw is firm.